威士忌冰球 冰波 冰格模 Whisky Sphere Big Ball Ice Molds

材質: PET
呎吋: 如圖

製作方法:
1. 將水倒入模具下層(不帶孔的那層) 水量建議八分滿
2. 將模具上層(帶孔的那層)往下壓 多餘的水會從小孔溢出
3. 將模具緩慢平穩放入冰箱冷凍 6-7小時即可
4. 取出模具用冷水沖洗模具表面1-2 分鐘左右在扭動冰格即可取出

Material: PET
Size: As shown in the picture

Production Method
1. Pour water into the bottom layer of the mold (the layer without holes). It is recommended to fill it 80% full.
2. Press the upper layer of the mold (the layer with holes) downwards. Excess water will overflow from the small holes.
3. Slowly and steadily put the mold into the refrigerator and freeze for 6-7 hours
4. Take out the mold and rinse the surface of the mold with cold water for about 1-2 minutes, then twist the ice tray to take it out

產品詳情請參閱包裝上說明。
圖片只供參考，一切以實物為準。

For details, please refer to the label on the product.
The picture above is for reference only. The real object should be considered as final.